VYTAC™ Chemical Neutralizers

VYTAC™ Chemical Neutralizers

The use of VYTAC spill neutralizing products is very important in the proper treatment and subsequent handling of hazardous material spills and process wastes.

By integrating VYTAC Neutralizers into your response program you can:

  • Simplify and minimize the risk of handling hazardous cleanup waste
  • Minimize the use of absorbents
  • Enhance spill site safety
  • Reduce workers’ exposure

VYTAC is for acids, alkalis, formaldehyde, mercury, sodium hypochlorate solutions, hydrogen peroxide solutions, radioactive liquid, glutaraldehyde and is a vapour suppressant for highly flammable liquids.

Description

A hazardous material spill has not been properly dealt with until the material has been rendered harmless. The use of sorbents allows for removal of the hazmat from the spill site but then the cleanup task only begins. The site must still be cleaned to remove unabsorbed residue. The absorbent and the absorbed hazmat must now be handled, stored, and ultimately disposed of as hazardous waste. In a full-compliance environment disposal involves the following tasks: warehousing, sorting, documenting material, arranging and paying for disposal by an approved company. In addition, handling and transferring has inherent risks of secondary accidents, possibly resulting in injury to employees and more spills.

Available as:

Part #ACX-1 – Powder for Acids, 4 kg
Part #ACX-2 – Powder for Acids, 22.7 kg Pail
Part #ACX-4 – Powder for Acids, 1 kg

Part #ACXL-1 – Liquid for Acid Spills, 22.7 L Pail
Part #ACXL-3 – Liquid for Acid Spills, 4.5 L
Part #ACXL-4 – Liquid for Acid Spills, 1 L

Part #ATF-1 – No Gas Liquid for Acids, 4.5 L
Part #ATF-2 – No Gas Liquid for Acids, 22.7 L Pail
Part #ATF-4 – No Gas Liquid for Acids, 1 L

Part #CSL-1 – Liquid for Alkali Spills, 22.7 L Pail
Part #CSL-3 – Liquid for Alkali Spills, 4.5 L
Part #CSL-4 – Liquid for Alkali Spills, 1 L

Part #CSP-1 – Powder for Alkali Spills, 22.7 kg Pail
Part #CSP-3 – Powder for Alkali Spills, 3.7 kg
Part #CSP-4 – Powder for Alkali Spills, .9 kg

Part #MIS-1 – Mercury Spill Kit (please visit this item under our spill kit section at https://rockymtnenvironmental.com/product/mercury-spill-kit/)
Part #MIS-2 – Powder for Mercury, 2.5 kg Bottle
Part #MIS-4 – Powder for Mercury, 750 gr
Part #MVS-1 – Mercury Vapor Suppressant, 600 gr Bottle
Part #MVS-2 – Mercury Vapor Suppressant, 7 kg Pail

Part #CONTXP – BioHazard absorbent, 1 kg

For any neutralizer part numbers not listed please call our office to for more information.