Description
Helpful hints:
- Bond-Aide P-1500 adheres to most surfaces. Best results will be achieved if area is first roughened by sanding or filing to clean and prepare surface.
- Starts to harden 2 minutes after mixing. Repair should be in place before hardening starts.
- A smooth finish can be obtained by rubbing with wet finger or damp cloth before hardening begins.
- Bond-Aide P-1500 can be drilled, filed, tapped, sanded and machined after one hour of curing (hardening).
- Can be painted immediately, even before full hardening.
- Bond-Aide P-1500 can be used under water. Mix as usual and use the polyethylene wrapper, so material will not stick to hands as the Bond-Aide P-1500 is being forced onto the wet surface.
- Not recommended for use on polyethylene and poly-propylene
- Wash hands thoroughly with soap and water after using Bond-Aide.
Physical Properties:
| Density 15.8 lb/gal | (1.9 gm/cm3) |
| Compression Strength | 18,000psi |
| Tensile Strength | 6,000psi |
| Modules of Elasticity | 6 x 103 |
| Shear Strength | 700psi |
| Izod Impact | 0.3 ft.lb/in of notch |
| -Hardness (Shore D) | 85 |
| -Maximum Use Temp | 3000F (1490C) |
Available as:
Part #P1500 – Bond Aide 7″ Epoxy Putty Stick
